Tuesday 10 February 2015

Door & Window Frame Roll Forming Machine

We offering you to an outstanding quality range of Door & Window Frame Roll Forming Machine. These Door Frame Roll Forming Machines can be customized as per customer requirement based. These Door Frame Roll Forming Machines are Mostly known for its stability and superiority. Our Door Frame Roll Forming Machines can be availed at best competitive rates.


  • De coiler 2 ton cap.
  • Entry Gate with
  • Roll Forming Line with 9 station , 1 Gear Boxes & 5 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit

Technical Specifications : ( Plate body)

  • Maximum sheet width that can be formed : 600 mm
  • Maximum sheet thickness in G I Strips that can be formed : 1 mm
  • Vertical distance between shafts : 100 mm
  • Horizontal distance between shafts : 190 mm
  • Number of forming stations : 9 nos.
  • Vertical station : 7 nos.
  • Total HP for Line : 5 (ABB)
  • Speed of the machine : 4mt/minute
  • Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 2 MT Max
  • Coil width : 600 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 50 mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 3 HP motor

Cable Tray Making Machine

The Cable Tray Roll Forming Machine Produced by us, is used for producing cable trays that are used in different kind of factories and buildings. We offering you to Cable Tray Machine that comprise of efficient Punching Press, Hydraulic Press, Electric Control penel and many other Equipment, which make it an ideal option for many. The Cable Tray Roll Forming Machine can Manufacring a both superiority and quantity cable trays in less time.


  • De coiler 2 ton cap.
  • Entry Gate with
  • Roll Forming Machine with 9 station, 1 Gear Boxes & 3H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit

Technical Specifications : (Plate body)

  • Maximum sheet width that can be formed : 600 mm
  • Maximum sheet thickness in G I Strips that can be formed : 1 mm
  • Vertical distance between shafts : 100 mm
  • Horizontal distance between shafts : 190 mm
  • Number of forming stations : 9 nos.
  • Vertical station : 7 nos.
  • Total HP for Line : 3(ABB)
  • Speed of the machine : 4mt/minute
  • Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 2 MT Max
  • Coil width : 600 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Suspended Ceiling Roll Forming Machine

We are involved in manufacturing and Exporter accurately Ceiling Section Roll Forming Machine. These products are mainly used for structure purposes in diverse industries. The entire range is fabricated using high quality raw materials at our modern and well-equipped manufacturing facility. We have a ability to produce bulk needs of ceiling section of customer within the specific time frame.


  • D coiler 5 ton cap.
  • Entry Gate with
  • Roll Forming Machine with 18 stations, 10 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit (Hydro.)

Technical Specifications

  • Maximum sheet width that can be formed : 1250 mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 1.2 mm
  • Horizontal distance between shafts : 500mm
  • Number of forming stations : 16 nos.
  • Total HP for Line : 8
  • Speed of the machine : 10 -14 mt / mint
  • Size of machine : 9500 x 1700 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 5 MT Max
  • Coil width : 1250 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

the main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

C Channel Roll Forming

We are one of the leading organization occupied in providing brilliant quality C Channel Roll Forming Machine, which are producing by using high grade material.we designed a lots kinds of C & Z Channel roll forming machine. due to the high graded superiority and our client fulfillment,The product by C&Z purlin roll forming machine has many benefit such as beautiful and colorful outside, light weigh, long life durability. It was widely used in every corn world wide. we can develop special C Purlin Roll Forming Machine as per customer requirement.

  • D Coiler 1 ton cap.
  • Entry Gate with
  • Roll Forming Machine with 14 station , 7 Gear Boxes & 10 H.P. electrical.
  • Power press 20 tone,
  • Feeder
  • Control Panel semi auto
  • Cutting Unit (Hydro.)

Technical Specifications

  • Maximum sheet width that can be formed : 170mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 2mm
  • Horizontal distance between shafts : 350mm
  • Number of forming stations : 18 nos
  • Vertical station : 7 nos
  • Total HP for Line : 17
  • Speed of the machine : 3.5mt/minit
  • Size of machine : 5700 x 1000 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 1 MT Max
  • Coil width : 400 MM
  • Coil bore : 450 MM min, 510 MM max dia
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Z Channel Roll Forming

We are the prominent Manufacturer & Exporter of Z Purlin Roll Forming Machine that is made by using the premium quality Equipment. Our Z Purlin Roll Forming Machine is inflexibly checked to ensure the high performance and long life Durability. This Z Purlin Roll Forming Machine is widely used as the supporter of roof and wall ceiling in construction segment, such as Many Industries, Godown , trade fair centers. Z shape purlins are made from hot cold roll tools and straighten, hole punched, cut to length,and roll former. You can Form different kind of profile in this machine.


  • D coiler 2 ton cap.
  • Punching press 20 tone 2 nos.
  • Entry Gate with
  • Roll Forming with 14 station, 7 Gear Boxes & 10 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit (Hydro.)

Technical Specifications

  • Maximum sheet width that can be formed : 450mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 2 mm(M.S.)
  • Horizontal distance between shafts : 400mm
  • Number of forming stations : 14 nos.
  • Vertical station : 12 nos.
  • Total HP for Line : 16
  • Speed of the machine : 4mt/minit
  • Size of machine : 6300 x 1200 x 1000 mm

Mandrel Uncoiler

  • Coil weight : 2 MT Max
  • Coil width : 400 MM
  • Coil bore : 450 MM min, 510 MM max dia
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Punching press

  • 20 tone power press
  • 2 nos. 3 HP

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Roll Forming Line

  • D coiler 2 ton cap.
  • Entry Gate with
  • Roll Forming Machine with 12 station , 1 Gear Boxes & 10 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit (Hydro.)

Technical Specifications

  • Maximum sheet width that can be formed : 1550mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 1 mm
  • Horizontal distance between shafts : 400mm
  • Number of forming stations : 12 nos
  • Vertical station : 11 nos
  • Total HP for Line : 13
  • Speed of the machine : 7 mt./minute
  • Size of machine : 6500 x 1100 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 2 MT Max
  • Coil width : 1200 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 60mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a gear box system and chain. The main drive will be provided by means of 10 HP motor

Tooling

One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.

Cutting Unit (Hydro)

Hydraulically operated power pack along with cutting die with 3 HP electrical.
  • Motor-ABB
  • Gear box - Elecon
  • Bearing - SKF

Gutter Roll Forming Machine

The Roll forming machine can Manufacturing a various kinds of gutters profile to satisfy customers’ required. Produced gutters are in fashionable outline and high superiority. Gutters are so mostly used in our daily life, so this machine will surely bring you a lot of profitable benefits to you.


  • D coiler 5 ton cap.
  • Punching press 20 tone 2 nos.
  • Entry Gate with
  • Roll Forming Line with 14 station , 7 Gear Boxes & 10 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit (Hydro.)

Technical Specifications

  • Maximum sheet width that can be formed : 450mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 3 mm(M.S.)
  • Horizontal distance between shafts : 400mm
  • Number of forming stations : 14 nos.
  • Vertical station : 12 nos.
  • Total HP for Line : 16
  • Speed of the machine : 4mt/minit
  • Size of machine : 6300 x 1200 x 1000 mm

Mandrel Uncoiler

  • Coil weight : 10 MT Max
  • Coil width : 400 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Punching press

  • 20 tone power press
  • 2 nos. 3 HP

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Deck Profile Roll Forming Machine

Our Deck Channel Roll Forming Machine are offered As per your requirement. our company has achieve great success in providing customer Services from all over the world with exilant machines featuring high technical content, optimized composition, reliable performance and easy operation. We are committed to providing quility machines for all customers with dedicated after-sales services.



  • D coiler 5 ton cap.
  • Entry Gate with
  • Roll Forming Line with 18 station , 10 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit (Hydro.)

Technical Specifications

  • Maximum sheet width that can be formed : 1450 mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 0.5 mm
  • Horizontal distance between shafts : 500mm
  • Number of forming stations : 18 nos.
  • Total HP for Line : 15
  • Speed of the machine : 10 -14 mt / minute
  • Size of machine : 9500 x 1700 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 5 MT Max
  • Coil width : 1450 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Ridge Sheet Roll Forming machine

We are among the leading names in industry, engaged in Producing an exclusive range of Ridge Cap Roll Forming Machine. We have developed our machine as per the industry standards. Owing to their easy manufacturing process, excellent performance and effective solutions, these machines are widely appreciated.


  • D coiler 5 ton cap.
  • Entry Gate with
  • Roll Forming with 18 stations, 10 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit (Hydro.)

Technical Specifications

  • Maximum sheet width that can be formed : 1250 mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 1.2 mm
  • Horizontal distance between shafts : 500mm
  • Number of forming stations : 16 nos.
  • Total HP for Line : 8
  • Speed of the machine : 10 -14 mt / mint
  • Size of machine : 9500 x 1700 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 5 MT Max
  • Coil width : 1250 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

the main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Arch Sheet Roll Forming Machine

Our Arch Sheet Roll Forming Machine has high Precession quality. Although there are many suppliers for this machine and many machine factory produce this machine, our company is the is a qualified Producer, Highlly Skilled Staff, After Sales Services. So our company is the best choice for you.


  • D coiler 5 ton cap.
  • Entry Gate with
  • Roll Forming with 18 station , 10 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit (Hydro.)

Technical Specifications

  • Maximum sheet width that can be formed : 1450 mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 0.5 mm
  • Horizontal distance between shafts : 500mm
  • Number of forming stations : 18 nos.
  • Total HP for Line : 15
  • Speed of the machine : 10 -14 mt / minute
  • Size of machine : 9500 x 1700 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 5 MT Max
  • Coil width : 1450 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roof Tile Roll Forming Machine

We take immense pride to introduce our company as one of the truthful manufacturers and exporters of Roof Tile Roll Forming Machine. A wide gamut of these machines is Producing by us by implementing world class quality. we are offering you to this Roof tile roll forming machine in as per your requirement. Our Roll Forming Machine is widely appreciated by the customer all around the world due to smooth and constantaly performance. Further, this Roof Tile Roll Forming Machine is Mostly used for manufacturing steel sheets that are used for the roofsof buildings.


  • D coiler 5 ton cap.
  • Entry Gate with
  • Roll Forming Line with 18 station , 10 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit (Hydro.)

Technical Specifications

  • Maximum sheet width that can be formed : 1450 mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 0.5 mm
  • Horizontal distance between shafts : 500mm
  • Number of forming stations : 18 nos.
  • Total HP for Line : 15
  • Speed of the machine : 10 -14 mt / minute
  • Size of machine : 9500 x 1700 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 5 MT Max
  • Coil width : 1450 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Corrugated Roll Forming

We are indulged in the manufacturing and exporting of Corrugated Sheet Roll Forming Machine. These products are designed to reduce man power and stable steel base design. These machines are used in industrial sectors and are available in market at Compititive Rates. These products equipped with various features including en31 material hafts, elecon gear box , abb motors and more. This forming line has no limit on processing length; you can set a program on the computer control according to your requirement


  • D coiler 5 ton cap.
  • Entry Gate with
  • Roll Forming with 18 stations, 10 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit (Hydro.)

Technical Specifications

  • Maximum sheet width that can be formed : 1250 mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 1.2 mm
  • Horizontal distance between shafts : 500mm
  • Number of forming stations : 16 nos.
  • Total HP for Line : 8
  • Speed of the machine : 10 -14 mt / mint
  • Size of machine : 9500 x 1700 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 5 MT Max
  • Coil width : 1250 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

the main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Gypsum Board Machine

Gypsum Channel roll Forming Machine is a vertical member in the light frame construction techniques called balloon framing and platform framing of a building's wall. Gypsum Channel roll forming machine is the essential for its production.



  • De coiler 2 ton cap.
  • Entry Gate with
  • Roll Forming Machine with 9 station , 1 Gear Boxes & 5 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit

Technical Specifications : (Plate body)

  • Maximum sheet width that can be formed : 600 mm
  • Maximum sheet thickness in G I Strips that can be formed : 1 mm
  • Vertical distance between shafts : 100 mm
  • Horizontal distance between shafts : 190 mm
  • Number of forming stations : 9 nos.
  • Vertical station : 7 nos.
  • Total HP for Line : 5 (ABB)
  • Speed of the machine : 4mt/minute
  • Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 2 MT Max
  • Coil width : 600 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Pop Channel Roll Forming Machine

Gurukrupa Industries manufacturing best quality POP Sheet Channel Roll Forming Machine in India also exporting worldwide. Most advanced yet simplest design and robust structure ensures precise performance, easy operation and higher efficiency. These machines are available with 'manually' as well as 'automatically control' panel.


  • D coiler 5 ton cap.
  • Entry Gate with
  • Roll Forming Line with 18 stations, 10 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit (Hydro.)

Technical Specifications

  • Maximum sheet width that can be formed : 1250 mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 1.2 mm
  • Horizontal distance between shafts : 500mm
  • Number of forming stations : 16 nos.
  • Total HP for Line : 8
  • Speed of the machine : 10 -14 mt / mint
  • Size of machine : 9500 x 1700 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 5 MT Max
  • Coil width : 1250 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

the main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Metal Stud Roll Former

We offering finest quality Metal Stud Roll Forming Machine to clients. This is the fastest machine on the market. The newly servo drive punch simultaneously advances and punches with accuracy as the material continually moves through the machine. Not only does this considerably increase the speed of the roll forming machine, but also increases the life of the equipment tools.


  • De coiler 2 ton cap.
  • Entry Gate with
  • Roll Forming Machine with 9 station, 1 Gear Boxes & 3H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit

Technical Specifications : (Plate body)

  • Maximum sheet width that can be formed : 175mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 1 mm
  • Vertical distance between shafts : 80 mm
  • Horizontal distance between shafts : 175mm
  • Number of forming stations : 9 nos.
  • Vertical station : 7 nos.
  • Total HP for Line : 3(ABB)
  • Speed of the machine : 4mt/minute
  • Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 2 MT Max
  • Coil width : 90 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Stud Roll Forming Machine

One of the most common uses for a Stud Track Roll Forming Machine is for the Producing of steel stud and Channel. With inflexible web and flange heights these industrial stud makers can produce virtually all of the standard stud and track sizes used in Worldwide Market.


  • De coiler 2 ton cap.
  • Entry Gate with
  • Roll Forming Machine with 9 station , 1 Gear Boxes & 5 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit

Technical Specifications : (Plate body)

  • Maximum sheet width that can be formed : 600 mm
  • Maximum sheet thickness in G I Strips that can be formed : 1 mm
  • Vertical distance between shafts : 100 mm
  • Horizontal distance between shafts : 190 mm
  • Number of forming stations : 9 nos.
  • Vertical station : 7 nos.
  • Total HP for Line : 5 (ABB)
  • Speed of the machine : 4mt/minute
  • Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 2 MT Max
  • Coil width : 600 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

T Grid Roll Forming Machine

We provide you the fully automatic T Bar Roll Forming Machine with punching of T-bars in the various models and Forming sizes. Our manufacturer is one of the earliest one in India to develop the main T grid roll forming machines. So we have ability to design custom t grid roll forming machines according to customer sample or profile drawings.


  • D coiler 500 Kg. cap.
  • Entry Gate with
  • Roll Forming Line with 20station , 5 Gear Boxes & 8 H.P. electrical.
  • Control Panel auto
  • Cutting Unit (hydro. )

Technical Specifications

  • Maximum sheet width that can be formed : 100 mm
  • Maximum sheet thickness in Strips that can be formed : 0.6 mm
  • Horizontal distance between shafts : 200mm
  • Number of forming stations : 16 + 5 nos.
  • Vertical station : 6 nos.
  • Total HP for Line : 5 + 3
  • of the machine : 4 mt/minit
  • Size of machine : 2500 x 900 x 1000 mm + 1500x900x1000mm

Mandrel Uncoiler

  • Coil weight : 500 kg Max
  • Coil width : 150 MM
  • Coil bore : 470 MM min, 520 MM max dia.
  • Mandrel movement : manually

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Safety Guardrail Roll Forming Machine

Highway Guardrail Roll Forming Machine can Produce a variety of guard rails which is Mostly used in high way Road. Produced guard rails are all in high quality, Durability, Long lasting Life and they are also easy to be installed. One production Machine can produce products of a wide range of specifications, so you will surely get Profile a lot.


  • D coiler 10 ton cap.
  • Punching press 100 tone
  • Entry Gate with
  • Roll Forming with 16 station , 8 Gear Boxes & 15 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit (Hydro.)

Technical Specifications

  • Maximum sheet width that can be formed : 850 mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 5 mm(M.S.)
  • Horizontal distance between shafts : 500mm
  • Number of forming stations : 16 nos.
  • Vertical station : 12 nos.
  • Total HP for Line : 23
  • Speed of the machine : 3 to 4 mt/minit
  • Size of machine : 8500 x 1600 x 1000 mm

Mandrel Uncoiler

  • Coil weight : 10MT Max
  • Coil width : 400 MM
  • Coil bore : 850 MM min, 1100 MM max dia.
  • Mandrel movement : Hydro.
  • Back Tension : Manually adjusted

Punching press

  • 100 tone Hydro. press
  • 5 HP
  • Oil tank 150 liter

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Shutter Patti Roll Forming Machine

Our Shutter Slat Roll Forming Machine is for producing aluminum shutter door & window Channel. Our Roll forming machine complete with the Roll Tool suitable to produce the foamed rolling shutter Channel in various sizes, inline foaming, punching and cutting. Rolling shutters now have become extremely popular in all our the world.

  • D coiler 1 ton cap.
  • Entry Gate with
  • Roll Forming with 10 station , 1Gear Boxes & 2H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit (manually )

Technical Specifications : (Plate Body Type)

  • Maximum sheet width that can be formed : 160 mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 1.25 mm
  • Horizontal distance between shafts : 150mm
  • Number of forming stations : 8 nos.
  • Vertical station : 5 nos.
  • Total HP for Line : 2
  • Speed of the machine : 5mt/minit
  • Size of machine : 1400 x 800 x 1000 mm

Mandrel Uncoiler

  • Coil weight : 1 MT Max
  • Coil width : 190 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure” C “ channel . It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

Plate type

Roll shafts

The roll shafts dia. 50 mm will be manufactured from quality steel and will be keyed to locate tooling.

Mcb Channel Roll Forming Machine

  • De coiler 1 ton cap.
  • Entry Gate with
  • Roll Forming Machine with 9 station , 1 Gear Boxes & 2 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit 

Technical Specifications : (Plate body)

  • Maximum sheet width that can be formed : 55mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 1 mm
  • Vertical distance between shafts : 80 mm
  • Horizontal distance between shafts : 175mm
  • Number of forming stations : 9 nos.
  • Vertical station : 7 nos.
  • Total HP for Line : 3(ABB)
  • Speed of the machine : 4mt/minute
  • Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 1 MT Max
  • Coil width : 90 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

U Channel Roll Forming Machine

  • De coiler 1 ton cap.
  • Entry Gate with
  • Roll Forming Machine with 9 station , 1 Gear Boxes & 2 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit 

Technical Specifications : (Plate body)

  • Maximum sheet width that can be formed : 55mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 1 mm
  • Vertical distance between shafts : 80 mm
  • Horizontal distance between shafts : 175mm
  • Number of forming stations : 9 nos.
  • Vertical station : 7 nos.
  • Total HP for Line : 3(ABB)
  • Speed of the machine : 4mt/minute
  • Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 1 MT Max
  • Coil width : 90 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Pipe Mill

  • D coiler 1 ton cap.
  • Entry Gate with
  • Pipe Mill with 10 stations, 10Gear Boxes & 15 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit Manually 

Technical Specifications

  • Maximum sheet width that can be formed : 370 mm
  • Maximum sheet thickness in S.S. Strips that can be formed : 2 mm
  • Horizontal distance between shafts : 500mm
  • Number of forming stations : 10nos.
  • Vertical station : 8 nos.
  • Total HP for Line : 18
  • Speed of the machine : 500mm/minute
  • Size of machine : 5500 x 1300 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 1 MT Max
  • Coil width : 400 MM
  • Coil bore : 470 MM min, 520 MM max dia.
  • Mandrel movement : Manually

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.