Tuesday 10 February 2015

Door & Window Frame Roll Forming Machine

We offering you to an outstanding quality range of Door & Window Frame Roll Forming Machine. These Door Frame Roll Forming Machines can be customized as per customer requirement based. These Door Frame Roll Forming Machines are Mostly known for its stability and superiority. Our Door Frame Roll Forming Machines can be availed at best competitive rates.


  • De coiler 2 ton cap.
  • Entry Gate with
  • Roll Forming Line with 9 station , 1 Gear Boxes & 5 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit

Technical Specifications : ( Plate body)

  • Maximum sheet width that can be formed : 600 mm
  • Maximum sheet thickness in G I Strips that can be formed : 1 mm
  • Vertical distance between shafts : 100 mm
  • Horizontal distance between shafts : 190 mm
  • Number of forming stations : 9 nos.
  • Vertical station : 7 nos.
  • Total HP for Line : 5 (ABB)
  • Speed of the machine : 4mt/minute
  • Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 2 MT Max
  • Coil width : 600 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 50 mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 3 HP motor

Cable Tray Making Machine

The Cable Tray Roll Forming Machine Produced by us, is used for producing cable trays that are used in different kind of factories and buildings. We offering you to Cable Tray Machine that comprise of efficient Punching Press, Hydraulic Press, Electric Control penel and many other Equipment, which make it an ideal option for many. The Cable Tray Roll Forming Machine can Manufacring a both superiority and quantity cable trays in less time.


  • De coiler 2 ton cap.
  • Entry Gate with
  • Roll Forming Machine with 9 station, 1 Gear Boxes & 3H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit

Technical Specifications : (Plate body)

  • Maximum sheet width that can be formed : 600 mm
  • Maximum sheet thickness in G I Strips that can be formed : 1 mm
  • Vertical distance between shafts : 100 mm
  • Horizontal distance between shafts : 190 mm
  • Number of forming stations : 9 nos.
  • Vertical station : 7 nos.
  • Total HP for Line : 3(ABB)
  • Speed of the machine : 4mt/minute
  • Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 2 MT Max
  • Coil width : 600 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Suspended Ceiling Roll Forming Machine

We are involved in manufacturing and Exporter accurately Ceiling Section Roll Forming Machine. These products are mainly used for structure purposes in diverse industries. The entire range is fabricated using high quality raw materials at our modern and well-equipped manufacturing facility. We have a ability to produce bulk needs of ceiling section of customer within the specific time frame.


  • D coiler 5 ton cap.
  • Entry Gate with
  • Roll Forming Machine with 18 stations, 10 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit (Hydro.)

Technical Specifications

  • Maximum sheet width that can be formed : 1250 mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 1.2 mm
  • Horizontal distance between shafts : 500mm
  • Number of forming stations : 16 nos.
  • Total HP for Line : 8
  • Speed of the machine : 10 -14 mt / mint
  • Size of machine : 9500 x 1700 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 5 MT Max
  • Coil width : 1250 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

the main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

C Channel Roll Forming

We are one of the leading organization occupied in providing brilliant quality C Channel Roll Forming Machine, which are producing by using high grade material.we designed a lots kinds of C & Z Channel roll forming machine. due to the high graded superiority and our client fulfillment,The product by C&Z purlin roll forming machine has many benefit such as beautiful and colorful outside, light weigh, long life durability. It was widely used in every corn world wide. we can develop special C Purlin Roll Forming Machine as per customer requirement.

  • D Coiler 1 ton cap.
  • Entry Gate with
  • Roll Forming Machine with 14 station , 7 Gear Boxes & 10 H.P. electrical.
  • Power press 20 tone,
  • Feeder
  • Control Panel semi auto
  • Cutting Unit (Hydro.)

Technical Specifications

  • Maximum sheet width that can be formed : 170mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 2mm
  • Horizontal distance between shafts : 350mm
  • Number of forming stations : 18 nos
  • Vertical station : 7 nos
  • Total HP for Line : 17
  • Speed of the machine : 3.5mt/minit
  • Size of machine : 5700 x 1000 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 1 MT Max
  • Coil width : 400 MM
  • Coil bore : 450 MM min, 510 MM max dia
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Z Channel Roll Forming

We are the prominent Manufacturer & Exporter of Z Purlin Roll Forming Machine that is made by using the premium quality Equipment. Our Z Purlin Roll Forming Machine is inflexibly checked to ensure the high performance and long life Durability. This Z Purlin Roll Forming Machine is widely used as the supporter of roof and wall ceiling in construction segment, such as Many Industries, Godown , trade fair centers. Z shape purlins are made from hot cold roll tools and straighten, hole punched, cut to length,and roll former. You can Form different kind of profile in this machine.


  • D coiler 2 ton cap.
  • Punching press 20 tone 2 nos.
  • Entry Gate with
  • Roll Forming with 14 station, 7 Gear Boxes & 10 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit (Hydro.)

Technical Specifications

  • Maximum sheet width that can be formed : 450mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 2 mm(M.S.)
  • Horizontal distance between shafts : 400mm
  • Number of forming stations : 14 nos.
  • Vertical station : 12 nos.
  • Total HP for Line : 16
  • Speed of the machine : 4mt/minit
  • Size of machine : 6300 x 1200 x 1000 mm

Mandrel Uncoiler

  • Coil weight : 2 MT Max
  • Coil width : 400 MM
  • Coil bore : 450 MM min, 510 MM max dia
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Punching press

  • 20 tone power press
  • 2 nos. 3 HP

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Roll Forming Line

  • D coiler 2 ton cap.
  • Entry Gate with
  • Roll Forming Machine with 12 station , 1 Gear Boxes & 10 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit (Hydro.)

Technical Specifications

  • Maximum sheet width that can be formed : 1550mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 1 mm
  • Horizontal distance between shafts : 400mm
  • Number of forming stations : 12 nos
  • Vertical station : 11 nos
  • Total HP for Line : 13
  • Speed of the machine : 7 mt./minute
  • Size of machine : 6500 x 1100 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 2 MT Max
  • Coil width : 1200 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 60mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a gear box system and chain. The main drive will be provided by means of 10 HP motor

Tooling

One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.

Cutting Unit (Hydro)

Hydraulically operated power pack along with cutting die with 3 HP electrical.
  • Motor-ABB
  • Gear box - Elecon
  • Bearing - SKF

Gutter Roll Forming Machine

The Roll forming machine can Manufacturing a various kinds of gutters profile to satisfy customers’ required. Produced gutters are in fashionable outline and high superiority. Gutters are so mostly used in our daily life, so this machine will surely bring you a lot of profitable benefits to you.


  • D coiler 5 ton cap.
  • Punching press 20 tone 2 nos.
  • Entry Gate with
  • Roll Forming Line with 14 station , 7 Gear Boxes & 10 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit (Hydro.)

Technical Specifications

  • Maximum sheet width that can be formed : 450mm
  • Maximum sheet thickness in CRCA Strips that can be formed : 3 mm(M.S.)
  • Horizontal distance between shafts : 400mm
  • Number of forming stations : 14 nos.
  • Vertical station : 12 nos.
  • Total HP for Line : 16
  • Speed of the machine : 4mt/minit
  • Size of machine : 6300 x 1200 x 1000 mm

Mandrel Uncoiler

  • Coil weight : 10 MT Max
  • Coil width : 400 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Punching press

  • 20 tone power press
  • 2 nos. 3 HP

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.